FabriCoil BASIC技术文档
| Type | Commercial Traffic Door | |
| Model | FabriCoil BASIC | |
| Mount | Interior | |
| Size | 12' x 14' Maximum | |
| Operation | Motor Drive or Hand Chain | |
| Drive | Left or Right Hand | |
| Material | 1-Ply PVC Fabric for Interior Use, or Polyurethane for Interior /Exterior Use | |
| Windload | Not for High Negative Pressure Installations | |
| Wind Beam | Aluminum Extrusion Enclosed in Curtain Pocket Every 4' | |
| Breakaway Tabs | Min. 1/4" UHMW | |
| Bottom Bar | Min. 2" x 2" x 3/16" Hot Rolled; Steel Angles; Finish: Black Primer (Standard)ArmorBrite Powdercoated or Galvanized (Optional) | |
| Vision Panels | Clear PVC 24" High with Curtain Fabric Reinforcement | |
| Color | Orange or Blue (Polyurethane-Orange Only) | |
| Mounting | Face (E or Z) or Jamb | |
| Guide Construction | Hot-Rolled Steel Angle | |
| Jamb Construction | Steel, Wood, Masonry or Non-masonry | |
| Color/Finish | Black, Galvanized or ArmorBrite Powdercoated | |
| Type | Hand Chain: Torsion Spring System; Motor: N/A | |
| Headplates | Thickness: 3/16" | |
| Barrel | 4" with 8" Rings and 24-Gauge Fascia | |
| Bearing Plug Assembly | Hand Chain: Removable on Drive End; Motor: Fixed, Welded Assembly | |
| Hood | Type: Round or Square (Optional); Material: Steel (24 ga.) | |
| Fascia | Material: Steel (24 ga.) (Optional or As Required by Mount Type) | |
| Headplate Cover | Steel (24 ga.) (Optional) | |
| Motor Cover | Material: Steel (24 ga.) (Optional); Mount Type: Bracket Mount; Access Doors Available | |
| Color/Finish | Standard: Gray; Optional Tan, ArmorBrite Powdercoated or Galvanized | |
| Interior | Dual Slide Bolts (Optional) | |
| Exterior | Dual Slide Bolts (Optional) | |
| Interior/Exterior | Dual Slide Bolts (Optional) | |
| Bottom Astragal | Looped Rubber Astragal Provided; Motor Operation: Optional Yellow Wireless Electric Reversing Edge | |
| Guide Brush Seal | 2" Brush with Aluminum Retainer (Optional) | |
| Header Brush Seal | 1-3/4" Brush with Aluminum Retainer (Optional) | |
| Masonry Anchors | 3/8" or 1/2" 4-Way Expansion Shields (Optional) | |
| Thru Studs | 3/8" x 14" or 1/2" x 14" Long Continuous Threaded Rod (Optional) | |
| Crush Plates | 4" x 4" x 8-Gauge (Optional) | |
| Type | Continuous Duty; Door Speed: 17" Per Second with Hand Chain Hoist | |
| Drive Mounting | In Front of Barrel | |
| Rating | 1 HP | |
| Power | 115V or 230V, 1 Ph., 230V or 460V, 3Ph., 60Hz | |
| Control Wiring | 24VDC Circuit | |
| Control Station | Provided with NEMA 1 Rated 3-Button Up/Down/Stop Functions | |
| Accessories | Safety Motor Interlock for Slide Bolt Locks (Optional); Radio Conrols, Other Hard Wired Controls (Optional) | |
| Parts | 1 Year Materials and Workmanship | |
文章搜索