ThermaSeal STANDARD技术文档
| Type | Commercial Sectional | |
| Model | ThermaSeal STANDARD | |
| Size | 28' x 20' Max | |
| Operation | Manual, Motor or Hand Chain | |
| Construction | 3-Layer Sandwich | |
| Material | Steel | |
| Surface Texture | Stucco Exterior, Stucco Interior | |
| Section Joint | Ship Lap | |
| Section Thickness | 1-3/4" | |
| Gauge | Steel; Exterior: 25-Gauge (.018"); Interior: 26-Gauge (.013") | |
| Stiles | 16-Gauge | |
| Insulation | Polyurethane (R-value = 16.4) | |
| Seals | Thermal Break, Bottom Seal (3", 4" EPDM, or 3" Yellow); Optional Header Seal | |
| Trussing | Windload: 20 P.S.F.(88 m.p.h.) (standard); Material: U-bar (18-Gauge or 20-Gauge); Sizes: 4", 6", or 8" | |
| Panel Configuration | NA | |
| Color | White, Dark Brown (Kynar) | |
| Windows | Oval (24" x 8"); Glass: 1/8" Insulated DSB, 1/8 Insulated Plexiglas, 3/16" Insulated, 1/4" Insulated Wire; Rectangular (34" x 16"); Glass: 1/8" Insulated DSB | |
| Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour | |
| Finish | Galvanized | |
| Size | 2” or 3” | |
| Gauge | 12, 13, 16-gauge | |
| Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance | |
| Springs | Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K) | |
| Shafts | Tube (13 gauge) or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed) | |
| Hinges | 11, 13, 14-Gauge or Hybrid | |
| Rollers | Standard (2" or 3") or Heavy Duty (2" or 3") | |
| Finish | Galvanized | |
| Lock | Interior Slide Lock or Exterior Lock Bars | |
| Seal | Jamb Seal | |
| Hanger Angle | 11, 13, 16-Gauge Galvanized | |
| Pedestrian Door | 32" Wide x 3 Sections High | |
| Optional Wind Loading | NA | |
| Posts | Swing-Up or Carry-Away | |
| Section Warranty | 1 Year (Rust), 10 Year Delamination | |
| Hardware Warranty | 1-Year | |
| Spring Warranty | 1-year or Cycle Life | |
文章搜索